ภาษาไทย English Francais
Last update: 2024/08/26 09:59

 

 

SOLVENT WITHOUT HAZARD PICTOGRAMS 
HYGIENE AND THE ENVIRONMENT
FOR THE PREPARATION OF NITRILE (NBR) - NEOPRENE (CR) SYNTHETIC RUBBER SOLUTIONS

 

 

PHYSICAL AND CHEMICAL PROPERTIES

PROPERTIES

STANDARDS

VALUES

UNITS

Appearance

Visual

Clear

-

Colour*

Visual

Colourless

-

Odour

Olfactory

Light – Peach

-

Density at 25°C

NF EN ISO 12185

905

kg/m3

Refractive index

ISO 5661

1.3990

-

Freezing point

ISO 3016

-70

°C

Boiling – Distillation

ISO 3405

119 - 164

°C

Solubility in water

-

Partially soluble

 

Kinematic viscosity at 40°C

NF EN 3104

1.0

mm²/s

Water content

NF ISO 6296

< 1

ppm

PERFORMANCE CHARACTERISTICS

PROPERTIES

STANDARDS

VALUES

UNITS

Evaporation rate

-

8

minutes

Surface tension at 20°C

ISO 6295

24

Dynes/cm

FIRE SAFETY PROPERTIES

PROPERTIES

STANDARDS

VALUES

UNITS

Flash point (vacuum)

ISO 2719

30

°C

Self-ignition point

ASTM E 659

> 220

°C

Lower explosive limit

NF EN 1839

1.6

% (by volume)

Upper explosive limit

NF EN 1839

13.7

% (by volume)

ENVIRONMENTAL PROPERTIES

PROPERTIES

STANDARDS

VALUES

UNITS

VOC (Volatile Organic Compounds) content

-

99

%

Water endangering

WGK Germany

1 safe

Class

Benzene content

ASTM D6229

0

%

Total halogen content

GC-MS

0

%

Chlorinated solvent content

-

0

%

Aromatic solvent content

-

0

%

Environmentally hazardous substances content

CLP Regulation

0

%

Content of compounds with a GWP

-

0

%

Content of compounds with an ODP

-

0

%

 

 

 

PRÉSENTATIONS :

 

 

 

 

 

 

 

1000 L IBC Container

5 L drum

20 L drum

200 L keg

 

Safety data sheet 160700 

 

Télécharger la Fiche Technique

 

 

 

 

 

  

SUCCESS STORY

 

Total replacement of Toluene (INRS Sheet 74) for the dissolution of Neoprene® (Polychloroprene) with Neutralene SL 70 in the manufacture of rubber coatings.

Toluene is classified H225, H314, H315, H336, H331d, H373.

 

Toluene has a closed-door flash point of 4°C,

NEUTRALENE® SL 70 of 30°C = declassification of flammability risk.

 

Toluene has a vapor pressure of 3 kPa at 20°C,

NEUTRALENE® SL 70 1.56 kPa at 20°C = reduction in consumption (useless loss by evaporation).

 

 

Manufacturing, lubrification, cleansing, protection,
IBiotec
® Tec Industries® Service 
offers a wide range of products reserved for industrial area

 


 If you wish for :

 

a free sample 
a technical advice 
a product data sheet 
a safety data sheet

 

Please contact us -

 


IBiotec® Tec Industries®Service
manufacturer of technical chemical products. 
Welcome to our website.



IBiotec® Tec Industries®Service is on : YOUTUBE